Design, Manufacturing, Supply, Delivery to Site, Installation and Commissioning of one Multi-drive for the replacement of Group 3 AC Multi Drive System and the re-use of the existing motors and motor cables. The project entailed the replacement of the existing Drive Systems for continuous Pickling Line No 3 at ArcelorMittal, Vanderbijlpark facility. Scope of Work: […]

Repair work on a Cold Mill at Hulamin in Pietermaritzburg can be summarized as follows: Scope of Work: Remove all damaged cabling Remove damaged cable support Verify and revise documentation such as Load Lists, Cable Schedules and Termination Diagrams Propose Material Lists Site establishment with Safety File and Risk Assessment Procure material Install new equipment […]

This project entailed the Design and Supply of a new 11kV Starter and Motors for the Blast Furnace D Baghouse. Scope of Work:  2 X 11kV Motors  1 X 11kV Auto Transformer  11kV Switchgear  PLC Control System  Power/Control Cabling The project was successfully implemented for ArcelorMittal at the Vanderbijlpark facility.

Supply, Install and Commission of a Variable Speed Drive with motor. Scope of Work: 1 X 1250KVA Transformer 1 X 900kW Induction Motor 1 X 690V Variable Speed Drive complete in Panel 1 X Local Operator Panel Refurbish one 3.3KV Circuit Breaker All Power Cabling All Control Cabling This project entailed the Engineering, Supply, Installation […]

Fire Damage Repair Project for a Basic Oxygen Furnace. During early 2013 a disaster occurred at the Basic Oxygen Furnace (BOF) plant at ArcelorMittal Vanderbijlpark works. Uncontrolled spillage of melted steel caused considerable damage to equipment. Scope of Work: Remove all damaged cabling for BOF 1-3 New cable routing and racking design New lighting distribution […]